Power bank top housings
Power bank housing with a hidden digital display
Appearance & process
IMD/IML housing with a window that blends into the panel when the display is off.
Discuss a custom version
Share a drawing or sample to discuss appearance, dimensions and application requirements.
Project enquiries13763144414
Dimensions, materials and appearance are subject to approved drawings and samples.
Back to ProductsProduct information & process
A hidden digital display window should blend into the housing when the backlight is off and show clear digits when it is on. A faint outline or gray rim in the off state, or a blurred outline and light bleed in the on state, indicates that the transition between the two areas needs adjustment.
Controlling the display window
The masking area must block light, the window must transmit it evenly, and the boundary between them must stay sharp. A light-blocking ink layer that is too thin may let the digits show when the backlight is off. An excessively thick layer may darken the edge when the backlight is on. Light bleed, jagged outlines, and hazy edges can be difficult to see in sample photographs. Check the assembled unit in low light.
During sampling, compare photographs of both backlight states. Check the edge and masking uniformity on each revision. The ink thickness and the outline of the transmissive window may need several adjustments before approval.
Manufacturing steps
- Screen printing controls the evenness of the masking ink and the definition of the window outline.
- Heat forming can change the shape of the transmissive area as the film takes its final form.
- During injection molding, resin flow can affect the window or shift the film. Reviewing these three steps together helps locate the source of a defect.
Sample review and material documentation
Review the housing material and its supporting documents against the finished product's applicable requirements during sampling. Confirm the window boundary, masking uniformity, and digit clarity with the backlight off and on. The approved sample defines the expected finish before production.
For a feasibility review, provide the part dimensions, required film material, estimated quantity, and the target display effect.